Microbial Control

Odor

Sterilization

Lubricants

Other Industries

MSDS

HOME

Membrane Filtration

Are No Clog Membranes Possible?

Most all membranes clog or foul. LCP Tech has developed high quality membranes with surfaces that significantly reduce fouling. This cutting edge technology opens opportunities for membrane filtration in areas that were not practical for membranes. These membranes are available for testing in a variety of pore sizes for your application.

High Rate - Mass Vapor Recompression - HMVR

Typical Mass Vapor Recompression (MVR) systems recover water from waste streams containing high solids concentration (precipitates, etc.).

Traditional Mechanical Vapor Recompression (MVR) involves large heat exchangers with significant capital cost, fouling, equipment maintenance (cleaning), and the solid are still quite "wet" after water recovery.

LCP Tech's High Rate Mechanical Vapor Recompression (HMVR) design overcomes these issues: HMVR prevents fouling of heat exchanger surfaces, resulting in a low cost system that can recover more water from waste streams more efficiently than MVR and the solids are "dry".

HMVR can be used synergistically with membrane filtration

Contact Information

Email: info@lcptech.com

LCP Tech Inc

8120 Indian Hill Rd

Cincinnati, OH 45243

Phone: 513-505-3013

Phone: 513-659-5859

Fax: 270-747-7082

LCP Tech Laboratory Located At:

1776 Mentor Ave,

Cincinnati, OH 45212