Products

Microbial Control

Fire Retardants

Cleaners

Membrane Filtration

Waste Waster

Process Water

Anaerobic Digestion Reactors

Corrosion

Cooling

Metalworking

Odor

Sterilization

Lubricants

Other Industries

MSDS

Industries

HOME

Cooling and Coolants

LCP Tech Inc. invented breakthrough chemistry for advanced fluids that can replace carbon based environmentally hazardous fluids such as coolants. The U.S. Environmental Protection Agency (EPA) has partially funded testing of this new chemistry as a metal working fluid/coolant. The chemical is non-toxic, recyclable, and does not support biological growth. This leads to other potential benefits such as longevity of use with global environmental suitability. LCP fluids maintain their viscosity over a wide temperature range (both hot and cold engines). These unique fluids can have a room temperature viscosity from <1cst to 1000cst each with a viscosity index of over 400.

To increase the heat transfer coefficients, the use of special additives based on nanotechnology is possible within the proprietary fluid.  LCP has a very economical process for this. These additives have high thermal conductivity but are non-magnetic in nature and are dispersed within the proprietary fluid or can be added to 50% ethylene glycol and/or other suitable fluids. The presence of these additives yield high thermal conductivity and has shown to increase heat transfer coefficients more than ten fold in our laboratory. The figure below shows significant heat transfer capability when compared to fluids used in the industry today. 

 

These fluids are very cost effective. Heat transfer data to date indicates that significantly smaller heat exchangers would be necessary if these fluids perform this well in actual automotive cooling systems. Significantly smaller heater cores, radiators, transmission coolers and fluid capacities would cost less and reduce the weight of the vehicle.

LCP Tech welcomes the opportunity to develop this technology through partnerships.

 

 

 

 

 

 

 


Contact Information

General Information & Sales: info@lcptech.com

 

LCP Tech Inc  

8120 Indian Hill Rd 

Cincinnati, OH    45243

 

Phone: 513-505-3013

Phone: 513-659-5859 

Fax:     270-747-7082

  LCP Tech Laboratory Located At: 1776 Mentor Ave, Cincinnati, OH  45212